Methods of plastic waste recycling with emphasis on mechanical treatment

Milan Trumić; Maja Trumić; Grozdanka Bogdanović

doi:10.30544/RSD21

Autori

Milan Trumić University of Belgrade, Technical Faculty, Bor, Serbia Author https://orcid.org/0000-0002-4321-5218
Maja Trumić University of Belgrade, Technical Faculty, Bor, Serbia Author https://orcid.org/0000-0001-9361-4412
Grozdanka Bogdanović University of Belgrade, Technical Faculty, Bor, Serbia Author https://orcid.org/0000-0002-1013-4075

DOI:

https://doi.org/10.30544/RSD21

Ključne reči:

reciklaža, plastičan otpad, mehanički tretman

Apstrakt

Potrošnja proizvoda od plastike je značajno povećana tokom poslednjih nekoliko decenija. Ovaj trend ima za posledicu stvaranje ogromnih količina otpada sa kojim treba pravilno upravljati da bi izbegli uništenje životne sredine. Proces reciklaže je opcija sa velikim potencijalom za rešavanje ovog problema. Ovaj proces je osmišljen da transformiše plastični otpad u nove materijale za proizvodnju plastike i obuhvata različite metode kao što su: Re-ekstrudiranje, mehaničke metode, hemijske metode i iskorišćenje energije. U ovom radu dat je pregled trenutne situacije generisanja plastičnog otpada u Evropi i opšti pregled alternativnih metoda za reciklažu.

Reference

*** (2012) Izveštaj o upravljanju ambalažom i ambalažnim otpadom u 2011. godini. Beograd: Agencija za zaštitu životne sredine Republike Srbije, jul

*** (2007) The compelling facts about Plastics 2007: An analysis of plastics production, demand and recovery for 2007 in Europe. Brussels, Belgium: PlasticsEurope, http://www.plasticseurope.org/plasticssustainability/ resource-efficiency/plasticsrecovery.aspx

Alauddin, M., Choudhury, I.A., El, B.M.A., Hashmi, M.S.J. (1995) Plastics and their machining: A review. Journal of Materials Processing Technology, 54(1-4): 40-46

https://doi.org/10.1016/0924-0136(95)01917-0

Al-Salem, S.M., Lettieri, P., Baeyens, J. (2009) Recycling and recovery routes of plastic solid waste (PSW): A review. Waste Management, 29(10): 2625-2643

https://doi.org/10.1016/j.wasman.2009.06.004

Al-Salem, S.M., Lettieri, P., Baeyens, J. (2010) The valorization of plastic solid waste (PSW) by primary to quaternary routes: From re-use to energy and chemicals. Progress in Energy and Combustion Science, 36(1): 103-129

https://doi.org/10.1016/j.pecs.2009.09.001

Brent, S.A. (2006) Plastics: Materials and Processing. Englewood Cliffs, New Jersey: Prentice-Hall, Inc, 917; 3rd Edition

Brydson, J.A. (1999) Plastics materials. Amsterdam: Elsevier

Buchan, R., Yarar, B. (1995) Recovering plastics for recycling by mineral processing techniques. Journal of Minerals, 47(2), 52-5

https://doi.org/10.1007/BF03221410

de la Mantia, F. (2002) Handbook of Plastic Recycling. UK: Smithers Rapra

Drelich, J., Kim, J.H., Payne, T., Miller, J.D., Kobler, R.W. (1999) Purification of polyethylene terephthalate from polyvinyl chloride by froth flotation for the plastics (soft-drink bottle) recycling industry. Separation and Purification Technology, 15(1): 9-17

https://doi.org/10.1016/S1383-5866(98)00047-1

EEA (2008) Better management of municipal waste will reduce greenhouse gas emissions. Copenhagen, Denmark: European Environment Agency

Fraunholcz, N. (2004) Separation of waste plastics by froth flotation: A review, part I. Minerals Engineering, 17(2): 261-268

https://doi.org/10.1016/j.mineng.2003.10.028

Jovanović, S., Džunuzović, J.V. (2011) Održivi razvoj i polimerni materijali. Reciklaža i održivi razvoj, 4(1): 1-13

Kang, H., Schoenung, J.M. (2005) Electronic waste recycling: A review of U.S. infrastructure and technology options. Resources, Conservation and Recycling, 45(4): 368-400

https://doi.org/10.1016/j.resconrec.2005.06.001

Kumar, S., Panda, A.K., Singh, R.K. (2011) A review on tertiary recycling of high-density polyethylene to fuel. Resources, Conservation and Recycling, 55(11): 893-910

https://doi.org/10.1016/j.resconrec.2011.05.005

Magdalinović, N. (1999) Usitnjavanje i klasiranje. Beograd: Nauka

Mesina, M.B., de Jong, T.P.R., Dalmijn, W.L. (2007) Automatic sorting of scrap metals with a combined electromagnetic and dual energy X-ray transmission sensor. International Journal of Mineral Processing, 82(4): 222-232

https://doi.org/10.1016/j.minpro.2006.10.006

Mihajlov, A. (2010) Segment održivog korišćenja prirodnih resursa i integralnog upravljanja odpadom: Reciklaža. Reciklaža i održivi razvoj, 3(1): 1-8

Mohee, R., Unmar, G.D., Mudhoo, A., Khadoo, P. (2008) Biodegradability of biodegradable/degradable plastic materials under aerobic and anaerobic conditions. Waste Management, 28(9): 1624-1629

https://doi.org/10.1016/j.wasman.2007.07.003

Mulder, K., Knot, M. (2001) PVC plastic: A history of systems development and entrenchment. Technology in Society, 23(2): 265-286

https://doi.org/10.1016/S0160-791X(01)00013-6

Nickolas, J. (2010) Identification and Assessment of Available Technologies for Materials and Energy Recovery. New York City, October 25, Report submitted to Flexible Packaging Association

Park, C., Jeon, H., Yu, H., Han, O., Park, J. (2008) Application of Electrostatic Separation to the Recycling of Plastic Wastes: Separation of PVC, PET, and ABS. Environmental Science & Technology, 42(1): 249-255

https://doi.org/10.1021/es070698h

Serranti, S., Bonifazi, G. (2010) A Post-Consumer Polyolefins (PP-PE) Recognition by Combined Spectroscopic Sensing Techniques. Open Waste Management Journal, 3, 35-45

https://doi.org/10.2174/1876400201003010035

Shapiro, M., Galperin, V. (2005) Air classification of solid particles: A review. Chemical Engineering and Processing: Process Intensification, 44(2): 279-285

https://doi.org/10.1016/j.cep.2004.02.022

Shen, H., Pugh, R.J., Forssberg, E. (2002) Floatability, selectivity and flotation separation of plastics by using a surfactant. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 196(1): 63-70

https://doi.org/10.1016/S0927-7757(01)00706-3

Smail, V.W., Fritz, A.K., Wetzel, D.L. (2006) Chemical imaging of intact seeds with NIR focal plane array assists plant breeding. Vibrational Spectroscopy, 42(2): 215-221

https://doi.org/10.1016/j.vibspec.2006.02.004

Tachwali, Y., Al-Assaf, Y., Al-Ali, A.R. (2007) Automatic multistage classification system for plastic bottles recycling. Resources, Conservation and Recycling, 52(2): 266-285

https://doi.org/10.1016/j.resconrec.2007.03.008

Takoungsakdakun, T., Pongstabodee, S. (2007) Separation of mixed post-consumer PET-POM-PVC plastic waste using selective flotation. Separation and Purification Technology, 54(2): 248-252

https://doi.org/10.1016/j.seppur.2006.09.011

Veit, H.M., Pereira, C.C., Bernardes, A.M. (2002) Using mechanical processing in recycling printed wiring boards. JOM, 54(6): 45-47

https://doi.org/10.1007/BF02701850

Vujić, G., Batinić, B., Stanisavljević, N., Ubavin, D., Živančev, M. (2011) Analiza stanja i strateški okvir upravljanja otpadom u Republici Srbiji. Reciklaža i održivi razvoj, 4(1): 14-19

Wills, B.A. (1997) Mineral processing technology. Boston: Butterworth-Heinmann

Zia, K.M., Bhatti, H.N., Ahmad, B.I. (2007) Methods for polyurethane and polyurethane composites, recycling and recovery: A review. Reactive and Functional Polymers, 67(8): 675-692

https://doi.org/10.1016/j.reactfunctpolym.2007.05.004